SOLDERING EQUIPMENT
|
|
|
|
|
SCHMIDT GAS/AIR IRONS Uses gas and compressed air to provide continuous heat to the tip. Concealed flame is easy to adjust by means of a bench mounted mixing valve, leaving just one supply line to the burner head. |
FORGED SOLDERING COPPERS Genuine drop forged coppers hold their heat longer than imitations. Keep your coppers clean and tinned using Johnson's Soldering Fluid and Allen's Sal Blocks. Coppers are sold in pairs, Handles are sold per each. |
||
| Complete except for Bafflehead & Copper Tip | 310-00 | 2 Lb/Pair, Pointed | 300-02 |
| 1-1/2" Bflhd. for #2 & #3 Tips | 310-02 | 3 Lb/Pair, Pointed | 300-03 |
| 1-3/4" Bflhd. for #4, 5, 6 and #8 Hcht | 310-03 | 4 Lb./Pair, Pointed | 300-04 |
| 2" Bflhd. for #8 Coppers (not Hatchet) | 310-04 | 5 Lb./Pair, Pointed | 300-05 |
| Burner Head Only | 310-10 | 6 Lb/Pair, Pointed | 300-06 |
| Mounting Hooks, Pair | 310-13 | 2 Lb./Pair, Chisel | 301-02 |
| #2 Chisel Copper | 310-22C | 3 Lb./Pair, Chisel | 301-03 |
| #3 Chisel Copper | 310-23C | 4 Lb./pair, Chisel | 301-04 |
| #4 Chisel Copper | 310-34C | 4 Lb./Pair, Hatchet | 302-04 |
| #5 Chisel Copper | 310-35C | 6 Lb/Pair, Hatchet | 302-06 |
| #6 Chisel Copper | 310-36C | 8 Lb./Pair, Hatchet | 302-08 |
| #6 Hatchet Copper | 310-36H | Wood Handle for 2, 3, 4 Lb, each | 303-03M |
| #8 Hatchet Copper | 310-38H | Wood Handle for 5, 6, 8 Lb, each | 303-04L |
| ALLEN'S SAL-AMMONIAC BLOCKS Pure, solid, long-lasting Sal-Blocks are ideal for fast cleaning and tinning of soldering coppers. |
ACETYLENE SOLDERING IRON Provides continuous heat for long seams. Has a shield to keep wind from blowing out the flame. The single gas valve swivels to prevent kinks in supplyline. |
||
| 1/4 Lb. Block - Single | 24-100-05 | Duplex Soldering Iron | 315-00 |
| Case of 36 | 24-100-06 | 1-1/4 Lb. Copper | 315-11 |
| 1/2 Lb. Block - Single | 24-100-07 | 3/4 Lb. Copper | 315-12 |
| Case of 24 | 24-100-08 | ||
| 1 Lb. Block - Single | 24-100-09 | ||
| Case of 12 | 24-100-10 | ||
| JOHNSON BENCH FURNACE Double burners and a refractory lining enable unit to heat several coppers at one time, fast! This bench mounted furnace is made of cast iron and is built to last. Specify Nat. or LP gas. |
 |
||
| #101 Bench Furnace, Nat Gas | 101-NG | ||
| #101 Bench Furnace, LP Gas | 101-LP | ||
HOME PAGE |
HISTORY |
NEW PRODUCTS |
FLUXES |
SOLDERS |
CHEMICALS
TOOLS & SUPPLIES |
CATALOG |
HEALTHWATCH |
MSDS |
INDUSTRIES |
E-MAIL
Johnson Manufacturing Company, Princeton, IA 52768, Ph 563-289-5123