JOHNSON'S PTR TOOLS AND CLAMPS
|
|
|
| |
| JOHNSON'S TAB TOOL World's most widely used hand tool for PTR repair work. Its hardened claw helps you open tabs "the right way" by lifting them up and away from the header. Its hardened jaws and compound action lets you crimp tabs closed with uniform force, faster than any other hand tool. |
JOHNSON'S WIDE TAB TOOL Like our Tab Tool, but has a wider claw and jaws for lifting and crimping wide aluminum tabs like those found on General Motors PTR's. Both Johnson Tab Tools work great for use with the TankMate Pro Series II PTR Fixture. |
|||
| Johnson's TabTool | 414-01 | Johnson's Wide TabTool | 414-01W | |
| Replacement Spring, Fits both Tools | 414-02 | |||
| STRAIGHT PTR CLAMP Straight arms and a longer handle allow this Gold Series Clamp to apply more gasket compression with less effort and distortion than other header clamps. Most automotive PTR's require a minimum of 3 clamps, longer tanks require 4 clamps or more. |
BEHR HEADER TOOL Designed by Behr engineers to properly reset the header over the tank flange. One surface locates itself on top of header, while another is machined to the correct depth for resetting dimples. |
|||
| Single PTR Clamp | 425-51 | Behr Header Tool | 418-01 | |
| Pair of Clamps | 425-52 | |||
| STANDARD J-CLAMP Johnson's Gold Series J-Clamps are used to fit-up conventional brass radiator tanks to headers, prior to soldering. |
TRACTOR J-CLAMP Features longer arms and a wider yoke making it ideal for clamping truck and tractor units. |
|||
| Single J-Clamp | 423-01 | Single Tractor Clamp | 426-01 | |
| Pair of Clamps | 423-02 | Pair of Clamps | 426-02 | |
| 2-WAY J-CLAMP Features longer arms and a pad that straddles deep drawn brass tanks. Johnson's Gold Series stands for "quality". |
SOFT BRASS HAMMER Another great tool borrowed from the sheet metal industry. Handy for restoring the shape and veritcal alignmentof brass or aluminum radiator headers, without damage. |
|||
| Single 2-Way Clamp | 424-01 | Dead Soft Brass Hammer | 411-05 | |
| Pair of Clamps | 411-05 | |||
HOME PAGE |
HISTORY |
NEW PRODUCTS |
FLUXES |
SOLDERS |
CHEMICALS
TOOLS & SUPPLIES |
CATALOG |
HEALTHWATCH |
MSDS |
INDUSTRIES |
E-MAIL
Johnson Manufacturing Company, Princeton, IA 52768, Ph 563-289-5123