Many industrial uses still exist for this easy-to-use Flux-'N-Solder combination. Unlike E-127, this formula contains 50/50 powdered solder (50% lead),and therefore must not be used when soldering drinking water systems, food handling equipment, livestock tanks, etc.

Due to its relatively low melting temperature (360-420°F) and its rapid tinning action, this paste is excellent for soldering automotive components and other assemblies. Residues are water soluble and should be removed after soldering.

1 lb Jar 10-07 10-08 12 14#

WARNING! CONTAINS LEAD Toxic if ingested or fumes inhaled. Wash hands after using and before eating, smoking or drinking. Toxic Fumes are released if overheated. Respirators & local ventilation may be required - See OSHA 29CFR 1910.1025 for regulations. Lead is a chemical known to the state of California to cause birth defects or other reproductive harm. The use of this solder in any potable water system is prohibited by Federal law.

View our Technical Bulletin | Safety Data Sheet for this product.