Johnson's new aluminum brazing flux is an excellent choice for the low-temperature joining of many aluminum alloys (excluding 5000 series) when using aluminum/silicone brazing rods, or lower temperature filler metals from the zinc/aluminum family. This unique formula contains complex fluoroaluminate salts that begin to melt at less than 850 degrees F, with a highly active range from 950 F to approximately 1000 degrees F.     As with many aluminum joining appplications, careful attention must be given to heating the base metal components when using a torch or open flame. This flux particularly favors an automated process where proper controls of the heating are in place. ZincTech-A Flux may be used sparingly, as it spreads very well when reaching its reactive stage. A visible change may be noted wherever the flux has reacted with oxides on the surface however, its residues are not considered corrosive after the joining process.

See all the other Johnson products for joining aluminum.

ITEM	SINGLE PART NO.	CASE PART NO.	NO. IN CASE	SHIP WT. CASE
ZincTech-A Flux for Aluminum, 1 Oz. Bottle	791-01	791-02	9	2#

HOME PAGE | HISTORY | NEW PRODUCTS | FLUXES | SOLDERS | CHEMICALS
TOOLS & SUPPLIES | CATALOG | HEALTHWATCH | MSDS | INDUSTRIES | E-MAIL

Johnson Manufacturing Company, Princeton, IA 52768, Ph 563-289-5123