JOHNSON'S D-5 POWDER FLUX

Super Dry Powder, Super Fast Wetting

Johnson's D-5 Powder Flux is specially formulated to form the fastest soldering blended powder flux available. D-5 also contains a special wetting agent so it stays on your work better; it doesn't dewet, or run off. Johnson's guarantees the free-flowing quality and uniformity of every batch. Usual mixes are 2 to 4 pints of clean water to 1 pound of flux.


ITEM
SINGLE
PART NO.
CASE
PART NO.
NO. IN
CASE
SHIP
WT.
10 Lb. Pail 31-02 31-03 4 44#
52 Lb. Pail 31-04 52#


JOHNSON'S 7129 TOP FLUX

Lowest Melting Flux Blanket for Solder Pots

Johnson's 7129 Top Flux is used as a blanket on solder pots for dipping and tube mill operations. It is well suited to high speed soldering because of its low temperature activation level, yet it remains active throughout the entire process. Note: All soldering salt formulations are hygroscopic and containers should be kept sealed to prolong storage life.

ITEM
PART NO.
SHIP WT.
50 Lb. Pail 31-28 52#
425 Lb. Drum 31-29 450#


JOHNSON'S HIGH-TEST TOP FLUX

Long-Lasting Flux Blanket for Solder Pots

Johnson's High-Test Top Flux is a unique blend of inorganic chlorides (salts) which forms a blanket on solder pots to minimize dross buildup. Sealing out oxygen keeps good metal from turning to oxides, which would otherwise have to be skimmed off and sold as scrap. This formula has an extended temperature range to prolong its life on the pot.


ITEM
SINGLE
PART NO.
CASE
PART NO.
NO. IN
CASE
SHIP
WT.
10 Lb. Pail 36-51 36-52 4 41#
50 Lb. Pail 36-53 52#
425 lb drum 36-45 450#


JOHNSON'S MAGNA FLUX

Economical, General Purpose Powder Flux

Johnson's Magna-Flux is an economical blend of chlorides (these are often referred to as soldering salts) that cleans and fluxes metals fast. It may be used dry on heated metal, but is generally mixed with water to form a slurry, then brushed on the area to be soldered. Note: Soldering salts attract moisture from the air; make sure the lid is kept tight to prevent moisture from turning these salts hard in the pail.

ITEM
PART NO.
SHIP WT.
50 Lb. Pail 36-04 52#

HOME PAGE | HISTORY | NEW PRODUCTS | FLUXES | SOLDERS | CHEMICALS
TOOLS & SUPPLIES | CATALOG | HEALTHWATCH | MSDS | INDUSTRIES | E-MAIL

Johnson Manufacturing Company, Princeton, IA 52768, Ph 563-289-5123