Aqui Flux

The familiar, tried and true, jeweler's yellow-green self pickling hard solder flux. Comes prepared, ready to use in 1 gallon containers and 5, 15 and 55 gal drums.

Part Number 11-00

1 gallon11-054 x 1 gallon11-06
5 gallon11-0715 gallon11-08
55 gallon11-09 


Luxi Flux

A blue, alcohol based, rectifying solution. Prevents fire scale and oxidation in hard soldering and torch annealing operations. May be used to rectify gas supply or by dipping work and allowing to dry before operation. Available in 1 gal containers and 5, 15 and 55 gal drums.

Part number 11-20

1 gallon11-254 x 1 gallon11-26
5 gallon11-2715 gallon11-28
55 gallon11-29 


For removing surface oxidation and scale from all jeweler's metals. Replaces dangerous sulfuric acid. A safe, dry, granular material. Use at the rate of 2.5 lbs per gallon of water. Available in 2.5, 10 and 50 lb containers.

Part Number 11-PC

2.5 lb11-PC-05 10 lb11-PC-07 50 lb11-PC-09


Eliminates bubbles by reducing surface tension, helping to assure complete adherence of the investment to the model. Either paint or dip model in solution. Available in 1 gallon containers, 5, 15 and 55 gal drums.

Part number 11-WW

1 gallon11-WW-054 x 1 gallon11-WW-06
5 gallon11-WW-1415 gallon11-WW-15
55 gallon11-WW-55 


Quickly and effectively dissolves flux residues and heat scale on both ferrous and non-ferrous metals. It will dissolve in a matter of minutes that glass-like buildup normally found after brazing or soldering and will permit effective part cleaning right on the production line. Supplied as a dry powder and prepared with water.

Part number 08-FR200

2.5 lb08-FR200-08 10 lb08-FR200-10
25 lb08-FR200-25 50 lb08-FR200-50