Johnson's Tin-Ezy is the fastest acting tinning compound you can use. A very dry, free flowing blend of powdered solder and special flux that cuts through dirt, grease, oil, paint and rust when heated. Tin-Ezy is most commonly used for tinning auto and industrial radiators, and other large areas economically. It works well on all common metals including aluminum, bronze, galvanized and other tough-to-tin metals. Tin-Ezy is usually mixed with water or Johnson's Soldering Fluid to be applied as a slurry, but is also quite effective when applied dry to heated metal. Its water soluble residues remain hygroscopic and corrosive until removed. Keep lid tightly closed when not in use to prevent hardening.

  SINGLE CASE Case of SHIP WT.
1 lb Jar 20-02 20-03 12 14#
4 lb Jar 20-04 20-05 6 27#
15 lb Pail 20-06 20-07 4 65#

WARNING! CONTAINS LEAD Toxic if ingested or fumes inhaled. Wash hands after using and before eating, smoking or drinking. Toxic Fumes are released if overheated. Respirators & local ventilation may be required - See OSHA 29CFR 1910.1025 for regulations. Lead is a chemical known to the state of California to cause birth defects or other reproductive harm. The use of this solder in any potable water system is prohibited by Federal law.


JOHNSON'S TIN-EZY POWDER with PURE TIN

This Full Strength Tinning Without Lead

Johnson's Tin-Ezy with Pure Tin tins quickly, yet contains no lead. Like Johnson's regular Tin-Ezy, it is made in a low-humidity environment to keep it dry and free-flowing for increased storage life. This special chloride flux formulation is blended with only Grade-A Pure Tin powder. Johnson's Tin-Ezy with Pure Tin is compatible with all solders however, it is particularly useful for tinning new metal, using Johnson's 497 Lead-Free Solder. Melting temperature is 450° F. Residues are water soluble and should be removed after soldering.

  SINGLE CASE Case of SHIP WT.
1 lb Jar 20-62 20-63 12 14#
4 lb Jar 20-64 20-65 6 27#
15 lb Pail 20-66 20-67 4 65#

View our Technical Bulletin | Safety Data Sheet for this product.